How do we replace stainless steel faucets?

How to replace the stainless steel faucet?

  1, before replacing the faucet, you need to close the main valve, cut off the water source is the first step to replace the faucet.

  2, after the water source is cut off, to remove the old faucet, and then find the faucet and the combination of water pipes, with a wrench stuck in the faucet, twist the wrench in the direction, do not twist too hard to prevent the old faucet broken in it, thus the processing becomes troublesome.

  3, after the old faucet unscrewed, take out the new faucet, in the new faucet connection wrapped around a few turns of raw tape, to avoid screwing on the faucet leakage, for the number of turns of raw tape to be based on the size of the screw holes in the faucet and water pipe joints.

  4, after the faucet tape is wrapped, align the screw hole, and then use a wrench to screw firmly, if the tape is wrapped too much, resulting in not easy to tighten, this time you can remove the faucet, remove a few turns of tape, and then tighten it.

  5, after the faucet is screwed, you can open the main valve, test whether the faucet leaks, if the leak may be the faucet and the water pipe joint is not tightened, it will be tightened on it.


Care and cleaning

The quality of the water jet can be improved by cleaning or replacing the so-called aerator. Never spray cleaning agents directly onto mixers or showers


The spray from overhead sprinklers flows unevenly from the sprinklers. Can not form fine spray condition. What should I do?

Clean the spout. For this, it is best to use a plastic scraper. Run the scraper through the spray nozzle completely in the case of running water. Particles can be rinsed off immediately.


What types of common taps do we have in life

Ordinary cold water faucet:Also called tap water faucet. It is installed in the tap line and used to release water. According to the valve body material can be divided into copper faucet, malleable iron faucet and cast iron faucet 3 kinds, the latter two are more widely used. The nominal diameter is generally 15mm, 20mm, and 25mm, and the nominal pressure is 0.6MPa.


How to properly maintain stainless steel faucets?

Most of the faucets used in modern decoration are made of stainless steel, good-looking appearance, practical and durable, but in the use of such products should also pay attention to maintenance, so that the product life is also longer, I am here to teach you how to properly maintain stainless steel faucets.