How to properly maintain stainless steel faucets?

Most of the faucets used in modern decoration are made of stainless steel, good-looking appearance, practical and durable, but in the use of such products should also pay attention to maintenance, so that the product life is also longer, I am here to teach you how to properly maintain stainless steel faucets.

　　1. switch faucet should not be too hard, homeopathic gently turn on the line. Even the traditional type of faucet, do not need a lot of force to screw, as long as the water is closed on it. There is not to use the handle as a handrail to support or use, under the continuous pressure will lead to faucet damage.

　　2. The new faucet will drip after closing the phenomenon, because the faucet is closed after the cavity has residual water, which is a normal phenomenon. If after a period of time or will have dripping phenomenon, may be product quality problems, you can find the salesman to repair.

　　3. The water contains trace amounts of carbonic acid compounds, in the metal surface after evaporation is easy to form scale and corrosion of its surface. This will affect the service life of the faucet, you can use soft cotton or sponge scrubbing faucet surface, do not use metal cleaning ball or cleaning cloth, easy to scratch the surface of the faucet, but also can not use hard objects to collide with its spout surface.

　　4. When the room temperature is lower than zero degrees Celsius, such as the faucet handle feel abnormal, you must use hot water shower sanitary products to feel normal, so that the operation will not affect the life of the faucet valve pistons.

What types of common taps do we have in life

How do we replace stainless steel faucets?

What types of common taps do we have in life

How do we replace stainless steel faucets?

02-07

Care and cleaning

The quality of the water jet can be improved by cleaning or replacing the so-called aerator. Never spray cleaning agents directly onto mixers or showers

01-31

The spray from overhead sprinklers flows unevenly from the sprinklers. Can not form fine spray condition. What should I do?

Clean the spout. For this, it is best to use a plastic scraper. Run the scraper through the spray nozzle completely in the case of running water. Particles can be rinsed off immediately.

01-31

What types of common taps do we have in life

Ordinary cold water faucet:Also called tap water faucet. It is installed in the tap line and used to release water. According to the valve body material can be divided into copper faucet, malleable iron faucet and cast iron faucet 3 kinds, the latter two are more widely used. The nominal diameter is generally 15mm, 20mm, and 25mm, and the nominal pressure is 0.6MPa.