Care and cleaning
The quality of the water jet can be improved by cleaning or replacing
the so-called aerator.
Never spray cleaning agents directly onto mixers or showers.
You descale the aerator by soaking it for around ten minutes in a household
cleaning agent suitable for this purpose
Limescale deposits in the shower head block the jets and allow water
to spray around in all directions.
The shower head is soaked in cleaning agent suitable for this purpose
and then thoroughly rinsed off.
Depending on the model, fixed overhead showers can be completely
unscrewed and treated with a descaling agent in the same way..
The quality of the water jet can be improved by cleaning or replacing the so-called aerator. Never spray cleaning agents directly onto mixers or showers
Clean the spout. For this, it is best to use a plastic scraper. Run the scraper through the spray nozzle completely in the case of running water. Particles can be rinsed off immediately.
Ordinary cold water faucet:Also called tap water faucet. It is installed in the tap line and used to release water. According to the valve body material can be divided into copper faucet, malleable iron faucet and cast iron faucet 3 kinds, the latter two are more widely used. The nominal diameter is generally 15mm, 20mm, and 25mm, and the nominal pressure is 0.6MPa.
Most of the faucets used in modern decoration are made of stainless steel, good-looking appearance, practical and durable, but in the use of such products should also pay attention to maintenance, so that the product life is also longer, I am here to teach you how to properly maintain stainless steel faucets.